5.016 Google reviews Sunshine Coast owned. Australia-wide delivery.
Home / Uniforms & Apparel / Hi Vis & Workwear

HI VIS & WORKWEAR

Hi vis is the one part of a uniform order where getting it wrong has consequences beyond the look of it. A garment either meets the standard your site requires or it does not, and that is decided by the manufacturer, not by us. So on this page we tell you exactly what each manufacturer publishes for each style, and we do not make compliance claims of our own.

Shop 467 styles with prices →Build your order

Popular styles

A few of the styles our customers pick most for this job. Prices are for the blank garment, inc GST, with bulk savings from 10 pieces. Your logo is quoted on top. The shop has all 691 styles with every colour, a size grid and supplier stock.

Brands in this rangeJB's Wear 198Syzmik 178Workcraft 160Australian Industrial Wear 135Flamebuster 14AS Colour 6

Shop all 467 hi vis →Shop all 224 workwear →Shop tradie workwear →Shop FR & taped hi vis →

Getting hi vis right

Day only, or day and night

There are two things a hi vis garment can do. Fluorescent fabric makes you visible in daylight. Retroreflective tape bounces headlights back at a driver in the dark. A day only garment has the fluorescent fabric and no tape. A day and night garment has both. If any part of the work happens in low light, at dusk, under lights or near moving vehicles, day and night is what gets asked for. Every garment in this range shows what its manufacturer publishes, and we confirm it in writing on your quote.

Two standards, commonly confused

AS/NZS 1906.4 covers the materials, which is the fluorescent fabric and the reflective tape themselves. AS 4602.1 covers the finished garment, meaning how much hi vis fabric it carries and where the tape sits. The current garment standard is AS 4602.1:2024. Note that it is an AS standard rather than AS/NZS, so it applies to Australia, where the edition it replaced was AS/NZS 4602.1:2011. Both editions are still quoted on product data in the market, so check which one a garment is certified to.

Where you can and cannot decorate

This is the part that catches people out. Decoration cannot reduce the compliant area of a hi vis garment, and it cannot sit on or across the reflective tape. In practice that means a chest logo and an upper back panel are fine, but a large back print on a taped shirt may not be, depending on the garment. Reflective tape also cannot be hooped for embroidery. We check the decoration plan against the specific garment before quoting, rather than after you have paid for it.

Drill, mesh and what your crew will actually wear

A 190gsm cotton drill shirt is the traditional site garment and it wears like iron, but it is hot. A micro mesh polo breathes far better and is what most Sunshine Coast crews reach for through summer, which is why the cotton back polo exists as a compromise. Work pants and shorts matter too, and the 2024 edition of the garment standard pays more attention to trousers and limb visibility than the one before it, so if your site has changed its requirements recently that is often why.

Who on the Coast needs this

Civil and construction

Day and night shirts as standard issue, drill work pants, and a hi vis hoodie for winter starts. Company name across the upper back is close to universal.

Traffic control and roadworks

Day and night is mandatory, not optional. Garment choice is driven by what the traffic management plan requires rather than by preference.

Landscaping and earthworks

Hi vis tees and singlets through summer, drill shirts when working near plant. Sun protection ratings get asked about as much as visibility does.

Trades on commercial sites

Plumbers, sparkies and chippies who need site compliant gear for some jobs and a plain polo for domestic work. Most order both in the same run.

Warehousing and logistics

Day only hi vis is often enough indoors, with day and night for yard and loading dock work. Usually a lighter mesh garment.

Councils and utilities

Procurement asks for the certification in writing, so the manufacturer standard and edition need to be on the quote from the start.

How your logo goes on

MethodWhat it isWhat it suitsMinimum guide
EmbroideryThread stitched into the fabric.
Your logo has to be digitised once, which is a one off fee of $68 inc GST per logo. We keep the file so reorders do not pay it again.
Polos, caps, business shirts, softshell, aprons, anything that has to read as a uniform.Around 10 to 12 on a new logo, often 1 on a reorder. Caps usually hold 12 either way.
DTF transferArtwork printed to film, then heat pressed on. Pressed in-house.
No screens means no setup, which is why complicated artwork on ten shirts is now realistic.
Small runs, full colour artwork, photographs, names and numbers, size top ups.Effectively none. Sensible from about 10.
Screen printingInk pushed through a mesh screen, one screen per colour.
Best cost per unit once the numbers climb, and the softest hand feel on a tee.
Larger runs of tees and hoodies, especially one and two colour designs.Around 20 to 25 per design per colour.
Applied patch or vinylA woven or printed patch, or cut vinyl, heat applied.
Useful when a logo has fine detail that thread cannot hold at the size you want.
Beanies, caps, small runs, and logos that will not embroider cleanly at size.Low, confirmed per job.

Minimums are a guide only and are confirmed on your quote. They move with the garment, the decorator and whether your logo is already on file.

More on each method: logo embroidery on the Sunshine Coast, screen printing on the Sunshine Coast, DTF printing on the Sunshine Coast.

Decoration positions and sizes

FRONTLeft chest80 to 100mmRight chest70 to 100mmCentre chest180 to 260mmBACKBack neckUpper back200 to 280mmFull back250 to 350mmSleeve50 to 75mmCAPCap front90 to 120mmCap side40 to 70mmPositions are described from the wearer’s point of view, so left chest means their left. Sizes are typical maximum widths and vary by garment.
PositionWhere it sitsTypical maximum width
Left chestThe default uniform position, on the wearer’s left.80mm to 100mm wide
Right chestSecond logo, a name, or an accreditation mark.70mm to 100mm wide
Centre chestCasual and merch, hoodies especially.180mm to 260mm wide
Upper backAcross the shoulder blades. The standard place for a business name.200mm to 280mm wide
Full backLarge merch prints and club designs.250mm to 350mm wide
SleeveUpper arm, left or right.50mm to 75mm wide for embroidery
Cap frontCentre front panel. Height is the tighter limit, not width.90mm to 120mm wide
Cap sideSmall secondary mark.40mm to 70mm wide

Positions are described from the wearer’s point of view. Sizes are typical maximums and vary by garment, so the mockup you approve is always the real answer. Full decoration guide →

How ordering works

Tell us what you need

Pick the garments below and send them through, or just describe the job. Headcount, rough sizes, how many logo positions and your deadline are enough to start.

We quote it properly

We price the garment, the decoration and the freight to your address as one number, and we confirm the real minimum order and lead time for your job rather than a general one.

Approve your mockup

You get a visual showing your logo in position and at actual size on the garment you chose. Nothing is stitched or pressed until you approve it.

We produce and deliver

As a guide, ten to fifteen business days from artwork approval, plus freight. The clock starts at approval, not at order, and supplier stock is the usual cause of a delay.

How we supply uniforms

We buy the garments ourselves from the major Australian workwear and apparel brands, so we can put you in the right garment rather than the one brand we happen to stock. DTF transfers are pressed in-house. The full colour film is printed for us by a trade printer, and we press, check and pack every garment ourselves. Embroidery and screen printing are done by an established Sunshine Coast decoration house we work with. Either way you deal with us from quote to delivery.

That is deliberate. It means a small order is not penalised for being small, and a size top up or a new starter’s shirt does not have to wait for a big production run. It also means we quote rather than show a live price on these pages, because the honest number depends on the garment, the quantity, the number of decoration positions and how many stitches your logo needs. As a guide, embroidery starts from $15.50 a garment inc GST at the lowest stitch count, plus the garment.

Minimums and lead times, honestly

Every number on this page is a guide, and we confirm the real one on your quote. As a rough guide: embroidery from around 10 to 12 units on a new logo and often a single garment on a reorder, screen printing from around 20 to 25 per design per colour, and DTF from about 10 with no real technical minimum. Caps usually hold a minimum of around 12 even on repeats.

Lead time is typically 10 to 15 business days from the moment you approve the artwork, plus freight to you. Two things get missed. The clock starts at artwork approval and not at order placement, and garment stock availability is the single most common reason a job runs late. If you have a fixed date, say so at the start and we will only quote garments that can actually make it.

One more thing worth knowing before you order. A decorated garment cannot be returned for a size swap, because it was made for you. For any rollout beyond about fifteen people, ask us about a size set so your team can try on rather than guess.

Artwork for uniforms and merch

Send a vector file, so EPS, AI or PDF with the fonts outlined. A logo pulled off your website will reproduce exactly as blurry as it looks on screen. For DTF and full colour work a high resolution PNG at the actual print size with a transparent background also works well.

Embroidery needs one extra step. Your logo has to be digitised, which is a separate file telling the machine the stitch path and the order it sews in. That is a one off cost per logo and the file is kept on record, so your reorders and your new starters do not pay it again. Fine text under about 5mm high, thin outlines and gradients are the three things that cause trouble in thread, and we will tell you before you commit rather than after.

One thing worth saying plainly. Decoration positions are described from the wearer’s point of view, so left chest means their left, which is your right when you are looking at them. Getting that straight at the start saves a whole reprint.

Frequently asked questions

Do you guarantee the garments are compliant?

We state exactly what the garment manufacturer publishes for that style, including the standard and the edition, and we put it in writing on your quote. We do not certify garments ourselves and no decorator should tell you they do. If your site requires certification documents, ask us and we will get them from the manufacturer for the specific style you are ordering.

What is the difference between day only and day/night?

Day only garments use fluorescent fabric to make you visible in daylight. Day and night garments add retroreflective tape so you are also visible in headlights after dark. If any of the work happens in low light or around moving vehicles, you almost certainly need day and night. Your site or your traffic management plan will usually specify which.

Can I put a big logo on the back of a hi vis shirt?

Sometimes, but not always, and it depends on the exact garment. Decoration cannot reduce the compliant hi vis area or sit over the reflective tape. On a taped day and night shirt the usable back area is smaller than people expect. Tell us the garment and the logo size and we will confirm what fits before you commit.

Which standard should I be asking for?

AS 4602.1 is the garment standard and AS/NZS 1906.4 is the materials standard. The current garment edition is AS 4602.1:2024. Ask your site or your principal contractor which class they require, day only, night only or day and night, and tell us. We will match the garment to it.

What is the minimum order?

As a guide, around ten to twelve units on a new embroidered logo, and fewer once your logo is digitised and on file. Print minimums differ by method. We confirm the real minimum for your garment on the quote.

Can you embroider over the reflective tape?

No. Tape cannot be hooped and stitching through it damages its performance. Decoration has to sit in the plain fabric areas of the garment. On most taped shirts that means a left chest logo and a panel above the back tape.

Do you supply work pants and shorts as well?

Yes. Cotton drill cargo shorts and pants, stretch twill pants and a kids size run on some styles. Pants and shorts are usually left plain, though a small logo on the leg pocket is possible if you want it.

Ready to kit out the team?

Send us the headcount, the garments you like and your deadline. We will come back with a real number, including freight to your address.

Build your order online →

Or send us a quote request

You might also need